Canon LBP6230dn/ LBP6230Dw iP address settings / Network settings

Setting IPv4 Address of Canon LBP6230dn / LBP6230dw

The machine's IPv4 address can be either assigned automatically by a dynamic IP addressing protocol, such as DHCP, or entered manually.

When connecting the Canon LBP6230dn / LBP6230dw to a wired LAN, make sure that the connectors of the LAN cable are firmly inserted into the ports

(Connecting to a Wired LAN).

1. Start the Remote UI and log on in System Manager Mode. Starting the Remote UI
2. Click [Settings/Registration].

3. Click [Network Settings] [TCP/IP Settings].

4. Click [Edit] in [IPv4 Settings].

5. Set the IP address.

Automatically assigning an IP address

1. In the [Select Protocol] list, select [DHCP], [BOOTP], or [RARP].

Note :
If you do not want to use DHCP/BOOTP/RARP to assign an IP address automatically
Select [Off]. If you select the [DHCP], [BOOTP], or [RARP] protocol when these services are unavailable, the machine will waste time and communications resources searching the network for these services.

2. Check that [Auto IP] is set to [On].

Note: If [Off] is selected, change the setting to [On].
Even if Auto IP is enabled, IP addresses assigned via DHCP/BOOTP/RARP override an address obtained via Auto IP.

Manually entering an IP address (Static iP address Canon LBP6230dn / LBP6230dw)

1. Select [Off] for [Select Protocol] and [Auto IP].
2. Set the [IP Address], [Subnet Mask], and [Gateway Address] fields.

6. Click OK

--------------------

****** Canon LBP6230dn / LBP6230dw - Starting the Remote UI instruction

To operate the machine remotely, start the Remote UI by entering the machine's IP address in your Web browser. Before starting, check the IP address that has been assigned to the machine (Viewing Network Settings). If you do not know the machine's IP address, ask your network administrator, or start the Remote UI from the Printer Status Window (Starting from the Printer Status Window).
1. Start the Web browser.
2. Enter "http://<IP address of the machine>/" in the address field, and press the [ENTER] key.

If you are using an IPv6 address, enclose the IPv6 address with brackets (example: "http://[fe80:2e9e:fcff:fe4e:dbce]/").
Note :

If a host name for the machine is registered with a DNS server
Instead of <IP address of the machine>, you can enter <"host name"."domain name"> (example: "http://my_printer.example.com").
If a security alert is displayed
A security alert may be displayed when communication with the Remote UI is encrypted (Enabling TLS Encrypted Communication for the Remote UI). If there are no problems with certificate settings or TLS settings, continue browsing to the Remote UI site.

3. Select [System Manager Mode] or [General User Mode].

[System Manager Mode]
You can perform all Remote UI operations and make all settings. If a PIN (system manager password) has been set, enter it in [System Manager PIN]. (Setting System Manager Passwords) If a PIN has not been set (factory default setting), you do not need to input anything.
[General User Mode]
You can check the status of documents or the machine, and you can also check the settings.

4. Click [Log In].

The Portal Page (main page) of the Remote UI appears. Remote UI Screens

Starting from the Printer Status Window

If you do not know the machine's IP address, you can start the Remote UI from the Printer Status Window.
1. Select the machine by clicking

in the system tray.

2. Click .

Your Web browser starts, and the login page of the Remote UI appears.

Note :
If a security alert is displayed
A security alert may be displayed when communication with the Remote UI is encrypted (Enabling TLS Encrypted Communication for the Remote UI). If there are no problems with certificate settings or TLS settings, continue browsing to the Remote UI site.

3. Select [System Manager Mode] or [General User Mode].

[System Manager Mode]
You can perform all Remote UI operations and make all settings. If a PIN (system manager password) has been set, enter it in [System Manager PIN]. (Setting System Manager Passwords). If a PIN has not been set (factory default setting), you do not need to input anything.
[General User Mode]
You can check print documents, check the status of the machine, and view machine settings.